Gear Aid Aquasure+FD Urethane Repair Adhesive & Sealant Glue
£11.95
Aquasure Urethane Repair Adhesive and Sealant Glue
Only 3 left in stock
| Brand | McNett |
|---|
CLICK AND COLLECT:
- If you are located in the UK at the checkout you will be able to select to collect from our Store in Gosport.
COURIERS WE USE:
- Royal Mail for small and medium parcels
- Parcel Force for medium items like kites, harnesses and iSUPs
- UPS, DHL & Parcel Force for larger items like booms masts and boardLarge items such as boards, booms and masts will be delivered in 3-5 days as bigger vehicles are required by the couriers and can induce delays.
DISPATCH: All items are dispatched from our Gosport Store and will experience a 24hr delay where we are closed on Tuesdays. Any orders taken after 1pm on Friday and over the weekend will be dispatched on Monday.
EU and Worldwide Postage: EU and Worldwide items are priced without VAT. Our webstore is not setup for orders outside the UK but if you would like to purchase from us please email us with your details and we will reply with a postage quote. Payment is required by Bank Transfer.
RETURNS: Use the address below for returns. If a refund is required we will refund only the value of the item(s) and not the postage. Returns must be made within 14 days unless the item is deemed faulty. Please include the original shipping label as this will have the order reference and you name on it.
RETURNS ADDRESS:
Andy Biggs Watersports
103 Bury Road
GOSPORT
PO12 3PR
DAMAGED ITEM: If an item is damaged in transit you must notify the us immediately upon delivery and let us know as soon as you can.
Related products
Ding All Epoxy Repair Kit 2+1fl oz
Ding All's Standard Epoxy Resin Ding Repair Kit works for both Epoxy and Polyester Ding repairs when UV light is NOT present and fiberglass cloth is needed.
This kit contains Ultra Clear, SS 2000 resin that is used in Epoxy surfboard construction. The resin is dual purpose, and can also repair polyester surfboards. The kit comes complete with the following materials to allow an easy method for small or medium surfboard repairs.
Epoxy Working time is approx. 30 minutes. Full cure in 6 to 8 hours at 77 degrees F.
*NOTE: Use 1/4” Layers of Filled Epoxy resin to fill larger holes or voids to avoid resin overheating.
Kit Includes:
- x1 - 2 oz. (56 ml). Ultra Clear Epoxy Resin Plus 1 oz. (28ml). Hardener - Non-Yellowing
- x1 - 15cm x 34cm Fiberglass Cloth patch
- x1 - 2 Sided Sanding Pad (1 side Smooth (120 grit) ,1 side Rough- (80 grit) For easy sanding.
- x1 - Measuring Cup Note: cup can be re-used after popping out hardened resin from previous repair
- x3 - Application/Mixing Sticks
- x1 - Cover Sheet Note: this is used to cover small dings to make super smooth finish once hardened. Just peel off.
- Easy Instructions
“Video Describing Differences between each Ding All and SunCure Repair Kits”: https://www.youtube.com/watch?v=NadxRdqcVXE
KiteFix ULTRA-ADHESIVE MONSTER BLADDER PATCH
Blown out your leading edge, now what? Replacing the bladder can take a long time and is usually very expensive. Our MONSTER Bladder Patch was created to give you another option. Our extra-large 9” x 12” ultra-adhesive, flexible patches can repair leading edge bladder holes up to 7” x 10” in size and at a fraction of the price.
Includes:
- One 12’’ x 9’’ ultra-adhesive patch and 4 alcohol swabs.
KiteFix Mini Repair Kit
Looking for an economical alternative to the KiteFix Complete Kit? Try the KiteFix Mini-Kit. We have streamlined this kit to provide the basics for repairing a canopy tear up to 48”, a 12” leading edge or strut repair and bladder leaks. If your kite canopy is white and you want just the basics, this is the kit for you.
Includes:
- 1 GluFix tube (1 oz.)
- 2 self-adhesive Dacron strips (12’’)
- 1 FiberFix white tape (4’)
- bladder ultra-adhesive patches (3’’x3 ½”)
- 1 GluFix applicator, 4 alcohol swabs
- 1 detailed user’s guide
- 1 KiteFix ‘lost board’ sticker
Solarez 2oz Polyester Ding Repair
SOLAREZ repair putty is a mixture of clear, non-yellowing, high strength, fiber reinforced polyester resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 30 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- Proprietary formula assures that millions of fiberglass fibers are thoroughly wet-out and evenly dispersed in every dose.
- Bubble-free mixture
- Denser cross-linking and surface cure
- No residual peroxides
- UV Stable
- Comes with 60/240 grit sand pad.
Please click the "Size guide" for the Tech Sheet.
Solarez 2oz Polyester Microlite White Filler Ding Repair
Lightweight, Sandable Filler
Formulated especially for surfboard [urethane] foam repair. For deep dings. Lightweight and easy to sand. Cures either by UV light in approx 3 minutes or by MEKP catalyst in 30 minutes.
Comes with 60/240 grit sand pad and spreader card.
Not for use on Styrofoam (EPS).
Please click the "Size guide" for the Tech Sheet.
Solarez 1oz Microlite Epoxy Filler Ding Repair
What is Solarez Microlite Epoxy?
It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding.
UV-CURE
- (for superficial dings less than 1/4″ deep)
- Apply in the shade.
- For easier shaping and faster curing, cover the wet resin with a sheet of clear plastic wrap (Mylar is best). You can easily shape the resin to the contour of the board.
- Expose to sunlight for 3 minutes
- Peel off plastic wrap and touch-up sand.
Please click the "Size guide" for the Tech Sheet.
Solarez 2oz Epoxy Ding Repair
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
- No mixing necessary. UV curing assures complete hardening.
- Provides complete crosslinking
- Remarkably tough and resilient
- Contains urethanes that keep from yellowing
- Eco-freindly ZERO vapors, non-flammable.
- Comes with 60/240 grit sand pad.
Please click the “Size guide” for the Tech Sheet.
Black Witch Neoprene Wetsuit Adhesive
Black Witch is a ready to use, solvent based, contact adhesive tested and approved as the only product suitable for use as the cut end sealant for SABREX®. Black Witch also exhibits excellent adhesion to neoprene, rubber and various types of flexible plastics and is therefore suitable for fast repairs to Neoprene wet suits and other water sports equipment.
Due to its fast flash off and long open period, bonds may be made over a wide range of open times and the fast-cure time of approx. 1 to 2 hours is especially suitable for quick in-field repairs. After cure, Black Witch exhibits good flexibility and resistance against heat, weathering, ageing, moisture and UV light. – For further technical information please refer to the below Technical Data Sheet and SDS.
How to use
1.) Instructions for use with SABREX®
Use Black Witch as a cut-end sealant for SABREX®. Note:- SABREX® is also known as FLCC in some markets.
Black Witch should be applied to the exposed face of the bottom sheath beneath the explosive and liner. Apply with a brush or stick. It should be worked into the black foam material until the foam cells are filled and covered with a smooth shiny coating that is uniform and continuous from edge to edge. - Black Witch should be allowed to cure for approximately one to two (1-2) hours before SABREX immersion. - Once opened, the 28g tube of Black Witch should be consumed within 30 days.
Note: In trials a 28g tube has proved sufficient to coat more than ten (10) SABREX® exposed cut-ends.
For further information please refer to below Black Witch Technical Data Sheet Revision 3. Issued 25.02.2014 and Black Witch SDS Revision 4. Issued 22.02.2012 - If the user has any further questions relating to safety or hazards concerning SABREX, please refer to the contact details on the SABREX User Instruction (CEU-205-01195) or Product Safety Datasheet (CEU-205-01196)
2.) Instructions for Neoprene repairs etc.
Step 1: Apply Black Witch with a short, stiff brush. - Apply a thin even coat of adhesive to both surfaces.
Step 2: When surfaces become ‘touch dry’ (i.e. adhesive is glossy and no longer transfers to the knuckles) align the bond edges and bond under maximum pressure.
If possible continue to maintain the jointed surfaces under pressure until Black Witch is cured in approximately one to two hours. Fully test all repairs prior to product use. Note: The full technical cure period is approximately three days. In case of contact with hands wash using brush soap and water.
Reviews
There are no reviews yet.