Foiling Accessories
UJ T-Nut Brass 8mm For Standard Windsurfing & Wing Board Mast Tracks
UJ T-Nut For Windsurfing deckplate
If sold out please look at our M8 Stainless T-Nuts
M6 Torx Fin Bolt A4 Stainless 40mm – 100mm
M8 Torx Head Counter Sunk Screw 20mm – 50mm
These are stainless steel M8 (8mm thread) counter sunk screws.
We do try to stock all M8 screws with the more widely used T40 Torx heads but it has proved difficult so unfortunately we have a mixture. You can use a T40 tool in T45 screw head but it is not ideal and will eventually round out the head. From the brands that we sell the main sizes are T30 and T40.
Screw sizes and Torx tool head size:
- 20mm = T45
- 25mm = T40
- 30mm = T40
- 35mm = T40
- 40mm = T40
- 50mm = T40
Stainless Metal anti twist Foot Strap Washer For Windsurfing Kitesurfing Winging
Stainless Metal anti twist Off-Set Foot Strap Washer For Windsurfing Kitesurfing Winging
M7 Starboard Stainless Windsurfing / Kitesurfing Foot strap screw 28mm & 32mm
M7 Stainless Windsurfing Kitesurfing Footstrap screw 32 & 28mmÂ
These are now standard footstrap screws for all Starboard windsurfing boards.
M8 T40 Torx Button Head A4 Stainless Screw 25mm & 30mm
These are A4 stainless steel M8 (8mm thread) T40 torx button head screws. Perfect for screwing your foil plate to you board. PLEASE CHECK LENGTH REQUIRED.
Footstrap Screw M6 (6mm) x 27mm Pozi A4 Marine Grade Stainless
M6 T30 Torx Head Counter Sunk Screw 10mm-40mm
These are stainless steel M6 (6mm thread) T30 torx head counter sunk screws.
Made from A4 Stainless Steal
M8 Stainless Allen Key (5mm) (Torx 25 also fits) Button Head Screw 30mm
These are stainless steel M8 (8mm thread) 5mm allen key button head screws. T25 Torx also fits.
These are mostly used for attaching foil plate to board. But please check the depth to the bottom of the foil track as you don't want to eat into the foil box. You may get water ingress or affect strength of box.
AFS F800 Super light wind carbon hydrofoil front wing
***Please note this is just for the front wing not the whole hydrofoil setup***
AFS F800 Super light wind carbon hydrofoil front wing
Get out in even lighter winds with the super light wind F800 foil !!
The F-800 foil windsurf wings have been designed to provide the maximum lift and stability in light winds. They are ideally suited to heavy riders and / or riders wanting to push the limits of windfoil navigation in light winds.
Monolithic manufacture full carbon prepreg. Made in France.
Compatible with all AFS foil windsurfing models.
AFS F700 Access 700mm/779 cm2 – Freeride Foil Front Wing
***Please note this is just for the front wing not the whole hydrofoil setup***
The AFS-F700 access is the standard front wing supplied with the AFS-W85 foil package.
This front wing is optimised to make Windfoiling fun and accessible to all levels of rider in moderate wind ranges.
It provides more low speed lift than the F-700, but it still has a large envelope of performance combined with this accessibility, making it suitable for all levels of rider from Beginner to Experienced and is ideal for all the Freeride - Freerace applications the majority of recreational riders will want to participate in.
It is best suited to use with the Stab v1, so is ideal for use as on the W85 and can be used as replacement for the original front wing on the W95 or the AFS-2 to provide a small gain in low speed lift, but a small loss in top speed as the trade-off.
The ultra-strong, Monolithic Full Carbon Pre-Preg T700 construction is the result of more than 11 years of research/testing that have gone into developing this product, to ensure it delivers unrivalled performance for the Beginner - Experienced Freerider in an intended wind range of 9-25 knots.
