Windfoil
NAISH Board Mount Screw Set Standard (x4)
BOARD MOUNT SCREW SET – STANDARD PLATE (TORX)
Four (4) M6 30 mm Stainless Steel Torx Screws
Four (4) M6 Stainless Steel T-nuts
CLICK HERE to go to the Starboard / Naish Foil Mount Screws and T-Nut Sets.
Naish Hydrofoil Bag Case 100cm x 25cm
2023 Starboard Freeride Evolution Hydrofoil with 85cm Aluminium Mast DEEP TUTTLE
FREERIDE
EVOLUTION
The most stable performance foil, sitting squarely between the SuperCruiser and the freerace GTR. It's the foil people are raving about, for how easy it makes high-speed, fast-exit, full-flight foil jibes.
Available in: Aluminium // Carbon C300*
| FW:Â Freeride 1100 Evolution C300 |
| TW:Â Freeride 500 C300 |
| Fuselage:Â 95 Evolution |
| Mast: 85cm 87° Carbon C300 or 85cm Aluminium V5 |
| *Carbon version supplied with Team Bag |
WHAT IS EVOLUTION?
The Evolution fuselages remove the front bulb to enhance water flow, maximise front wing efficiency and reduce drag. Your foil cuts through water smoother, faster and effortlessly.
The new mini-bridge for the front wing saddle adds stiffness for more flight control
The tail wing saddle and the mast mounting sections remain unchanged, so tail wings and masts from the Original generation and the Plus generation remain compatible.
2023 Starboard Superflyer Evolution Hydrofoil with 85cm Aluminium Mast DEEP TUTTLE
SUPERFLYER
EVOLUTION
New! The SuperFlyer is the next level up from the SuperCruiser. It offers similar riding characteristics with a bit more glide and speed.
Available in: Aluminium // Carbon C300*
| FW:Â SuperFlyer 1300 Evolution C300 |
| TW:Â 330 C300 |
| Fuselage:Â 102 Evolution Classic |
| Mast: 85cm 87° Carbon C300 or 85cm Aluminium V5 |
| *Carbon version supplied with Team Bag |
WHAT IS EVOLUTION?
The Evolution fuselages remove the front bulb to enhance water flow, maximise front wing efficiency and reduce drag. Your foil cuts through water smoother, faster and effortlessly.
The new mini-bridge for the front wing saddle adds stiffness for more flight control
The tail wing saddle and the mast mounting sections remain unchanged, so tail wings and masts from the Original generation and the Plus generation remain compatible.
Severne Redwing 250 stabalizer
Starboard Freeride Plus Foils Wing & Mast Cover Set
M8 Locking Brass T Nut Set (x4 nuts)
Set of 4 Locking T-Nuts M8
Stop loosing your nuts with the Locking T-Nuts. Order a set of four and give your board the re-vamp it needs. These locking T-Nuts are for all foil boards.
How it works:Â
- Open your newly purchased pack of four locking T-Nuts.
- Place them in the tracks of your boards
- Mount the foil mast like you would normally, lining up the t-nuts with the bolts how you normally would.
- Carefully remove bolts and mast. Try not to nudge the t-nuts!
- Here is where the magic happens. Carefully do the grub screws up one by one.
- DO NOT OVER TIGHTEN! They only need to be done up enough to pinch the t-nut in place.
- Repeat on all T-nuts! You are all done, now you will not loose these pesky little nuts any more. And even better they will always be in the perfect place!!!
M8 T40 Torx Button Head A4 Stainless Screw 25mm & 30mm
These are A4 stainless steel M8 (8mm thread) T40 torx button head screws. Perfect for screwing your foil plate to you board. PLEASE CHECK LENGTH REQUIRED.
M8 Torx Head Counter Sunk Screw 20mm – 50mm
These are stainless steel M8 (8mm thread) counter sunk screws.
We do try to stock all M8 screws with the more widely used T40 Torx heads but it has proved difficult so unfortunately we have a mixture. You can use a T40 tool in T45 screw head but it is not ideal and will eventually round out the head. From the brands that we sell the main sizes are T30 and T40.
Screw sizes and Torx tool head size:
- 20mm = T45
- 25mm = T40
- 30mm = T40
- 35mm = T40
- 40mm = T40
- 50mm = T40
M6 T30 Torx Head Counter Sunk Screw 10mm-40mm
These are stainless steel M6 (6mm thread) T30 torx head counter sunk screws.
Made from A4 Stainless Steal
